John:
When faced with an impossible task--use penetrating oil. Use real
penetrating oil, not cheap junk solvent sprays. Just apply two drops. Let
it sit for half a day. Apply two more drops. Repeat morning and evening.
Then use the two sockets and a vise method. I learned this from Bob, ( he
said for 10 days) an "old car restorer". It should work, but is not fully
guaranteed. It worked for my brother on his MGB.
Heating it may have been a bad thing to do. Heat can bake the grease into
hard stuff.
Ed Bratt
Regina, Saskatchewan
1976 TR6
Ed
----- Original Message -----
From: "John North" <johncnorth@gmail.com>
To: "Triumph 6 Pack" <6pack@autox.team.net>
Sent: Thursday, February 21, 2008 8:49 PM
Subject: [6pack] U-joint removal, last trick in my book
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|