Bob,
They go behind the door panel. Purpose is to keep the black escutcheons
against the handles. They are a PITA as well to keep back there while you are
trying to line up thew clips. Make sure that you tape some plastic across the
door under the panel as a water barrier before you put them on.
Lou
------Original Message------
From: robert fabie
Sender: 6pack-bounces+lfm614=aol.com@autox.team.net
To: TR-6 list
Sent: Feb 10, 2008 11:11 AM
Subject: [6pack] Door Handle and Window Winder SPRING
On a TR6, does the large spring go behind the black plastic escutcheon or
behind the door panel? Should be self evident, but I just dont' remember
where it was when I pulled the handles and panel off.
Oh, and by the way, lining up those new clips on the new panels so they
conform to the holes in the door is a real PITA!
Thanks.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|