6pack
[Top] [All Lists]

Re: [6pack] TR6/2500 74 or later cylinder head needed

To: Sally or Dick Taylor <tr6taylor@webtv.net>, Tony Gordon
Subject: Re: [6pack] TR6/2500 74 or later cylinder head needed
From: Greg Perry <rgperry@earthlink.net>
Date: Thu, 29 Nov 2007 08:56:25 -0600 (GMT-06:00)
Dick and Tony,

My Triumph repair manual shows the change point of the exhaust valve:

exhaust head diameter 1.256 to 1.260"
Petrol engine
up to eng. no. CR 2844 intermittent from engine no. CR 2845 to CR 2935

Carb. Engine
up to eng. no. CF12500

exhaust valve dia. 1.193 to 1.197"
Petrol Eng.
Intermittent from Eng. No. CR2845 to CR2851 Complete from Eng. No. CR 2936

Carb. Eng.
>From eng. No. CF12501

Greg Perry

-----Original Message-----
>From: Sally or Dick Taylor <tr6taylor@webtv.net>
> Tony---I just went down this road, and found it was the early head,
>pre-73, that had the larger exhaust valves. (My '73 also had the larger
>valves, but don't know how this happened.)
>Dick
> 
>From:
>
>Tony wrote:
>To help identify the head: I need: the later head with the 1.19" exhaust
>valves; the earlier head - pre mid 73 or so - had the 1.25" ex. valves. 
>Tony Gordon
>72 TR6 




<Prev in Thread] Current Thread [Next in Thread>