John,
I've had Justin's gasket on my TR6 for about 6 or 7 years now and it's never
leaked so much as a drop of oil. I've also had the valve cover off the car
about 3 or 4 times since getting the gasket, so it really is reusable.
There's a link to Justin's site on my web site.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of John Gillis
Sent: Tuesday, October 02, 2007 1:28 PM
To: Triumph List
Subject: [TR] Silicone gasket
Hi all,
Just filled up my yet to be started re-built motor, even the act of pouring
oil into the engine resulted in some weeping from a few places around the
rocker gasket, the cover was torqued down enough. I think I might get myself
the silicone version and dispose of the cork. Justin are you still supplying
these, or is there another source these days.
Regards
John
One TR2 ready to go!!!!!
_______________________________________________
75tr6@tr6.danielsonfamily.org
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.488 / Virus Database: 269.13.37/1042 - Release Date: 10/1/2007
6:59 PM
Checked by AVG.
Version: 7.5.488 / Virus Database: 269.13.37/1042 - Release Date: 10/1/2007
6:59 PM
Checked by AVG.
Version: 7.5.488 / Virus Database: 269.13.37/1042 - Release Date: 10/1/2007
6:59 PM
|