Stan,
If I rember correctly there are 'cage' nuts in the B post that the top
frame secures to. The top two are one assy and the bottom another. If
there is no screw in the botton that is most likely your rattle. Take a
screw from the top and put it in the lower hole and see what happens.
Bill
'70 6
Foster, Stan wrote:
>For as long as I can remember I have had a rattle on the drivers side that
>only shows up when I go over a bump. I always thought it was something loose
>in the drivers side door but I'm beginning to think it is actually coming from
>high up in the B post. The hood frame is snugged up tight as is the door latch
>so I'm at a loss as to what else could be rattling..
>
>The only thing I notice is that on both sides there are three holes in the
>hood frame attachment plate but there are only two screws in place. The lower
>hole in that plate is unused. I wonder if there is another plate inside the B
>post that should be anchoring that lower screw ?
>
>Any other suggestions ?
>
>Stan
|