David & all
I see by your VIN # that you have a later model TR-6.
If you still have the thermo adapter in the top radiator hose assembly and
are not using it, this would be a good place to install the probe. A brass
fitting with the proper threads for both can be had at a good hardware or
plumbing supply store.
This also puts the probe closer to the radiator and the fan for wiring issues.
Dale
David Friedlander <forzion@maine.rr.com> wrote:
Hey list;
I'm planning to use a screw-in temperature probe with the 16" electric
puller fan
I'm installing. Can this sensor (3/8"-18) be screwed into the spot on
the water
pump currently occupied by the stock TR temp sensor rather than welding
a bung into the radiator for it?
Thanks for any help!
Dave Friedlander
CF25194UO
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
|