Robert,
I am running ZS carbs with modified needles. I agree my problem is ignition
related, the GP2 cam seems to be very nice for street use, very smooth when
the timing is right. I am chasing an ignition problem that shows up when
using a timing light on the #1 plug wire. The timing mark will appear
correctly then disappear occasionally; it actually shows up ~120 degrees
clockwise from vertical. If I connect the light to #6 plug wire everything
is stable (any other plug wire shows a stable position). I have swapped
plug wires, cap, rotor, tried points, Crane XR700, and Petronix to no avail.
I am currently running with points.
Any suggestions welcome.
Dave
|