Hi Ray,
That's a matter of opinion I suppose. In my opinion, not really, the fork
wasn't interested in coming of off the shaft because the remains of the old pin
were stuck in the hole. I guess I could have tried to drill out the old pin and
reuse the shaft... But I figured the hole may have been worn a bit from the
fork working back and forth on the old broken pin anyway. Plus I already
purchased a new shaft.
Kendall
www.chrispens.org/~kendall/clutchpin.html
--- Ray Drinkwater <raydrink@tiscali.co.uk> wrote:
> Kendall,
>
> Is that a hacksaw you took to a good cross shaft?
>
> Ray
|