Dear Listers,
I followed all of your instructions and it was just as
described (thanks to all who replied). Super=glude
the parts back together and we are as good as new!
Funny part was the turn signal indicator broke on me
while repairing the high beam indicator. These items
are old and very fragile. It was a snap, and because
of your comments, I was confident that I could do it.
Thanks again.
The next issue is one of the horns are dead after
getting the wiring straightened out. Took it apart
and cleaned the points, etc with no luck so I'll need
to buy a new one. So how do I tell if I need the high
note horn or the low note? The horn that does operate
is on the right hand side... and I suspect it is the
high note. Any help is appreciated.
--- "Foster, Stan" <stan.foster@hp.com> wrote:
> Sean, the speedo is fairly straightforward to
> dismantle but you do need
> to take care.
Sean O'Brien
1975 Topaz TR6
http://www.triumphowners.com/679
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
|