6pack
[Top] [All Lists]

RE: Bonnet Release

To: "JOHN JOHNSON" <john70350@msn.com>, <6pack@autox.team.net>
Subject: RE: Bonnet Release
From: "Navarrette, Vance" <vance.navarrette@intel.com>
Date: Sat, 27 Aug 2005 14:57:52 -0700
        John:

        My experience has been similar. The replacement spring seems to
be weaker than the original spring. I usually need to tug on the hood to
get it to raise.

        Vance


-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of JOHN JOHNSON
Sent: Friday, August 26, 2005 7:57 PM
To: 6pack@autox.team.net
Subject: Bonnet Release


Hi Guys, We all hear about all the bonnet release problems. I replaced
my 
release cable, striker and spring mechanism with new parts from TRF. The

spring peice that mounts to the bonnet seems flimsy at best and I see
why so 
many guys remove that little release handle that mounts to the bonnet.
The 
problem on mine is that even with the new parts that spring seem weak
and 
barely lifts the bonnet. Has anyone dealt with and solved these issues? 
Thanks guys.




<Prev in Thread] Current Thread [Next in Thread>