As Shawn says they are KN wheels and are also sold by TRF.
http://www.zeni.net/trf/TR250-6/120.php?s_wt=1400&s_ht=1050
TRF has the hub adapters listed separately, but it's not so clear where you get
the wheel center
spline. Better call them.
Don Malling
Shawn J. Loseke wrote:
>>===== Original Message From "Robert G. Pindell" <pinderg@sbcglobal.net> =====
>>My PO installed alloy wheels with a bolt-on center splined hub.
>>I am concerned about spline wear, but don't know the origin
>>(seller or manufacturer) of the setup to buy a new wheel center,
>>if available.
>>A photo of the wheel is posted at www.geocities.com/pinderg/wheel .
>>Perhaps someone in the group can identify the wheel and origin.
>
>
>>Thanks in advance,
>
>
>>Bob
>>
>>73 BRG
>
>
>
> Those appear to be knock off sport wheels that Moss sells.
> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29891
>
> If the splines are worn then you really need to check the wheel to. Splines
> and wheels should be replaced as units. Otherwise one will just cause the
> other to prematurely wear.
>
> Shawn J. Loseke
> Fort Collins, CO
> http://www.triumphowners.com/79 (1972 TR6)
> http://www.triumphowners.com/690 (1980 TR8)
|