Listers,
The below message may be an alternative to what I was referring to in my
previous message. I now recall the parts supplier was McMaster Carr but the
collar and bearing I got was all in one piece. My description of this device
as an accellerator shaft bushing was incorrect as I knew but failed to engage
my brain before dashing off the message. According to one of my parts books it
is correctly identified as the "pedal Shaft bushing". Dale indicated he
couldn't post the below message to the list so I am forwarding it for your
information.
MIke Lunsford
Sent this out yesterday. Does not for some reason seem to be going to the list.
Dale
Dale <tpdwinch@yahoo.com> wrote:
Date: Sun, 3 Jul 2005 11:04:48 -0700 (PDT)
From: Dale <tpdwinch@yahoo.com>
Subject: Re: Accelerator Shaft bushings
To: Flemming Larsen <flarsen@sbcglobal.net>, 6pack@autox.team.net
Flemming
A while back Nelson from the Buckeye Triumph Club researched this same
thing. He came up with this.
>From McMaster - Carr
Bearing # 6338K461 $ 0.54 approximate
Collar # 6435K13 $ 1.52 approximate package # 1C-037
Need two of each. One of the bearings needs to be drill out a bit to
get over the knull part of the shaft.
Our club bought enough for twelve cars reducing the cost.
Dale
|