I have the 7/8s in the rear and Toyota front calipers in the front. I also
have duel .75" bore Tilton master cylinders. I have a balance bar on the brake
pedal. I have to bias it to the rear as even the 7/8s rear cylindes do not
take as much pedal as the fronts. When I build my TR250 race car I will use
5/8ths master cylinders.
Chuck
Date: Wed, 18 May 2005 06:50:52 -0700
From: "Michael Hutchinson" <mahutchinson@cox.net>
Subject: Re: TR6 wheel cylinders
I found out that the wheel cylinder from a Sunbeam Alpine will work and has
a larger than stock bore of 7/8". I figure that ought to work with the
Toyota caliper upgrade up front. Once again, thanks to all.
Michael Hutchinson
'71 TR6
|