Check to see if you made the same stupid mistake that did. I mounted
the clutch slave cylinder on the FRONT of the mount plate instead of
through it coming in from the back. This had the effect of moving the
cylinder forward about a half inch, thus making the rod appear too
short.
-Shannon
On 5/14/05, JOHN JOHNSON <john70350@msn.com> wrote:
> I am putting a Six togther and just started it. It has a new clutch,pressure
> plate, t/o bearing,braided line,clutch pushrod,slave cylinder,silicone fluid
> and a rebuilt clutch m/c. When I go to bleed the clutch it seems like the
> pushrod is way too short,if I bleed the system and shift the gears while
> it's running on jackstands it wants to spit the pushrod out of the slave
> cylinder. It has already spit the piston out of the slave cykinder twice.Do
> I need an adjustable pushrod? Please help!
|