Hi All,
Today I pulled the tach and the speedo to get at the steering wheel, clamp
so that I could replace the turn signal switch that was broken in shipment.
I also replaced the turn signal flasher unit. Alas, no dice. My turn signal
still won't work.
I could have a bad circuit. I swapped fuses with a good circuit to the
circuit that was giving me trouble. Same results. I do have back-up lights.
My blower motor seems intermittent. My sending unit is giving me nothing,
but that is maybe because I pulled the voltage stabilizer along with the
speedo. So my next target is my emergency flasher switch. I wanted to check
contimuity across it but it seems my VOM has vamoosed. I think now that in
the morning, I will jumper off position of the switch and see what happens.
Any wise words of wisdom to help me along?
Regards,
John Cyg.
|