Thanks Dick! You were correct. I cleaned the contacts and the lights are
now working correctly!
Thanks!
Adam
73 Tr6
-----Original Message-----
From: Sally or Dick Taylor [mailto:tr6taylor@webtv.net]
Sent: Sunday, April 04, 2004 8:02 PM
To: Adam C Beasley
Cc: 6pack@autox.team.net; triumphs@autox.team.net
Subject: Re: Brake and Oil Warning lights
Adam---Your model has a three wire sender, coming out of the block,
under the distributor. Check that all three connections are making good
contact. When oil pressure comes up to about five lb., it trips the
switch and these lights should go out. If contacts are good, its
possible that the pressure switch is bad. You can bench test the switch,
using an Ohms or multimeter and a source of compressed air to move the
switch off its seat. My first guess is the contacts.
Dick
'73
|