Or a dab of axle grease around the threads... actually,
anti-seize is my preference.
I use one of the 69 dollar pump up suckers...... from Eastwood.
Much better than the Mityvac... less hand strain.
Walt Boeninger
-------------
Rick & Lori wrote:
> Chuck--I really appreciate my MityVac as it does double duty as a vacuum
> gauge for evaluating the state of engine tune. I solved all problems with
> air leakage by wrapping the bleeder screw threads with teflon tape. You will
> not be disappointed doing the same. You can make your own pressure bleeder
> if you have a spare MC cap and compressor, but then you have to keep
> unscrewing the thing to refill the MC reservoir during the bleed. Take your
> pick.
>
> Rick O.
> 72 TR6
|