Try wiggling the wire connections to the relays and fuse box. I sometime
lose the temp & fuel guage .
and thats the fix.
Also check the ground connections, make sure they are clean so there is a
good connection.
al salvatore
76tr6 daily
----- Original Message -----
From: "Kevin McNelis" <kmcnelis@nmsu.edu>
To: <6pack@autox.team.net>
Sent: Wednesday, October 15, 2003 2:55 PM
Subject: At my wit's end
> About a month ago I bought a '72 TR6. Been having electrical problems.
> Found that where the wiring bundle goes thru the firewall above my left
> foot, the rubber grommet had disintegrated. Wires were rubbed down thru
the
> insulation. I THOUGHT I had it all fixed- replaced the on-the-column
> headlight switch ($150), the voltage stabilizer ($20), found a broken lug
> on the hazard switch ($50), and brakelight switch) ($10). I still have no
> brake lights, no fuel gauge, no temp gauge, am I am very frustrated.
Short
> of replacing the entire wiring harness, any suggestions? I am sick of
this
> thing- If no one can give me some guidance, I'm gonna sell the damn thing
> and be done with it. Thanks in advance.
|