I was referring to the nuts that are welded into the frame where the engine
crossmember bolts in. They are also used for the rear bumper side bracket
mounts as well as other places.
Michael
> Michael:
>
> If you are talking about the nuts that are held in place by the boxed
metal,
> these are available from TRF and MOSS. All you need to do is cut out the
> old metal cage and then put in a new nut into the new cage and spot weld
to
> the chassis in the correct position.
>
> Scott Suhring
> Mechanicsburg, PA
> '70 TR6
> '59 TR3
>
> -----Original Message-----
> From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On
> Behalf Of Michael Hutchinson
> Sent: Monday, October 20, 2003 2:28 PM
> To: The Usual Suspects; 6pack@autox.team.net
> Subject: captured nuts on chassis
>
> Does anyone know of a source for the captured nuts that are welded into
the
> chassis of my 6? I have a few that need to be replaced before I have it
> sand
> blasted. Just let me know. Thanks in advance.
>
> Michael Hutchinson
> '71 TR6 (Lazarus)
>
> *** http://www.team.net/the-local ***
|