Two Choices:
Take off the EGR valve and plug the holes or do as a friend of
mine did and file the edge off the EGR valve, they then sealed the edge,
but I am not sure with what.
Al Salvatore
76tr6
----- Original Message -----
From: "Rudnicki, Steve" <Steve.Rudnicki@gdcanada.com>
To: <6pack@autox.team.net>
Sent: Wednesday, July 23, 2003 1:08 PM
Subject: Alloy Valve cover interference with EGR Valve
> I'm considering the purchase of an alloy valve cover. I have a 74 and 1/2
> TR6 with the EGR valve. I see in the TRF catalogue that they note that
the
> EGR valve may interfere with the alloy valve cover. Mine looks like it
has
> about a 1/4" clearance between the EGR casing and the valve cover. Any
> experience with this issue to pass on would be appreciated.
>
> By the way I'm back on the road after an 11 year restoration. It's great
to
> be driving the brute once again.
>
> Steve Rudnicki
> CF30348U
/// 6pack@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|