Hi,
I am getting ready to fire up a new rebuild & I'm priming the oil pump
with a drill. The most I can muster at about 800rpm is about 19 lbs of
pressure @ the gauge. Oil has only dribbled out of the first & second
rocker arm pedestal but not out of the rocker arms.
I am turning the pump in a counter clockwise direction.
This does not seem to be enough pressure but then the pump should turn
about half the speed of the crank.
Any suggestions.
--
Mitch Seff
Oceanside, N.Y.
75 TR6
http://www.angelfire.com/ny4/triumph5/
|