Mitch:
Your machine shop person is correct. You want to
degree the cam referencing the centerline of the intake
lobe, not the leading edge of maximum lift.
Vance
---------------------------------------
The most likely way for the world to be destroyed, most experts agree, is
by accident. That's where we come in; we're computer professionals. We
cause accidents. - Nathaniel Borenstein
-----Original Message-----
Hi all,
I just spoke to the machine shop and explained how I set the cam. He
said it is not correct. I set the cam to the suggested 113 degree at
full intake at the front of the ramp where it first hits maxinum lift..
He said I should have used the same method as finding TDC. So actually
if the lobe sustains full intake for an additional 8 degrees I should
find the center of the lift duration.
Any comments.
--
Mitch Seff
|