Al,
Thanks for the reponse. I did finally find a match. A Murray/Everco 57044
will match. This is a 6 cubic inch capacity compressor.
Terry Geiger
'74 TR6 daily driver
Florence, Alabama USA
http://www.ShoalsBritishCars.org/
----- Original Message -----
From: "Alan" <asalvato@tampabay.rr.com>
To: "Terry Geiger" <twgeiger@hiwaay.net>
Cc: "6pack" <6pack@autox.team.net>
Sent: Friday, May 02, 2003 3:38 PM
Subject: Re: a/c compressor replacement
> I replaced my york with a Saden or Setec.
> It reads SE_ _ 15, where I have dashes I can't read the markings. model
#
> 194663.
> Manufacturer is SEGM
> You will also need the saden mounting adapter, if your mounting it to the
> York mounting brackets.
>
> regards
> al salvatore
> 76tr6
> ----- Original Message -----
> From: "Terry Geiger" <twgeiger@hiwaay.net>
> To: "6-pack list" <6pack@autox.team.net>
> Sent: Friday, May 02, 2003 3:00 PM
> Subject: a/c compressor replacement
>
>
> > I am in the process of installing one of the dealer add-on air kits on
my
> > TR6. I would like to replace the York compressor with a rebuilt or new
> > unit. Does anyone have a part # for a direct replacement compressor?
We
> > have not been able to match the numbers on the original unit.
> >
> > Also, I've noticed that some are using a Sanden rotary compressor to
> > replace the York unit. Can anyone provide a part # for this conversion?
> >
> > I will be using 134a and have a new 134a expansion valve.
> >
> > I intend to document all part #'s, etc and add publish all information
on
> > the web when completed.
> >
> > Terry Geiger
> > '74 TR6 daily driver
> > Florence, Alabama USA
> > http://www.ShoalsBritishCars.org/
|