Date: Wed, 16 Apr 2003 12:28:48 -0700 (PDT)
From: William Maslin <cwrm4@yahoo.com>
Subject: TR6 Accel Pedal Bushing Kit on eBay?
The Buckeye Triumphs site has an article on building the accelerator
shaft bushing using parts similar to the ones on ebay -- the differences
being a collar is used to hold the shaft in place and there are no
plastic bushings. I bought the parts and installed them in about an
hour [cleaning gunk on the accelrator shaft so the bushings would slide
being what took the longest time].
http://www.buckeyetriumphs.org/technical/AccBearing/AccBearing.htm
The parts come from McMAster-Carr [look them on Google.comif needed]:
Parts required:
This requires one 3/8 ID collar, McMaster-Carr part # 6435K13 at
$1.52. [get several].
Bearings [oil impregnated brass bushings] are available with a 3/8 ID,
5/8 OD and 7/8 flange OD. The shortest one is = long
(McMaster-Carr part #6338K461 --- $0.54 each).
Lot cheaper than $10-15.
Chuck
[demime 0.99d.1 removed an attachment of type text/x-vcard which had a name of
chuck.arnold.vcf]
|