I went to the autoparts store and got some studs with 5/16 fine thread
at one end and 3/8 course thread at the other. With the threads pulled
out of the trailing arm, the hole is about right for the 3/8 tap. after
tapping
the hole, I cleaned it and put the new stud in with Locktite.
Any GOOD autoparts store will have these studs. I think they were Dorman
brand.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Borgstede !
Distance Learning Engineer !
University of Missouri - St. Louis ! '68 Triumph TR-250
Phone: (314)516-6433 ! (or two or more)
Fax: (314)516-6019 !
Email: borgstede@umsl.edu !
|