Tim,
Ken Mahre has a new email address: 3v6forfun@adelphia.net
I have some photo's, including a photo of the spacer on my page:
http://users.clinic.net/~rpatton/engine.htm
Rick Patton
patton@suscom-maine.net
http://users.clinic.net/~rpatton/
75 Delft Blue TR6
>Date: Tue, 26 Nov 2002 16:30:14 -0800 (PST)
>From: Timothy Holbrook <tjh173@yahoo.com>
>Subject: Fwd: Electric Fan Conversion
>
>Check this website: http://www.hottr6.com/triumph/tr6fan.html, it's a
>very good resource. I mounted a 16" fan on my radiator, a Permacool
>model 19126. Got it from Jegs.com. I mounted it as a puller, screwed
>directly to the radiator frame. I don't have a thermostatic switch for
>it, just a manual on/off switch in the car. I had to remove the stock
>mechanical fan and fan extension to fit the electric fan, and used a
>machined adapter from Ken Mahre (email delivery@cdh.net) for $35 to
>replace the stock fan extension piece. In order to fit the fan on the
>radiator as a puller, I found it was necessary to slot the radiator
>mounting holes a bit so that I could push the radiator forward about
>3/4", due to clearance problems with the tubular crossmember.
>
>Tim Holbrook
>1971 TR6
|