Your number's sound ok to me Walt. Sears once told me a fully charged
battery off the shelf should be charged to around 12.75 volts.
Here's a couple of good links for alternator t-shooting.
http://www.tpub.com/basae/index.htm http://www.tpub.com/basae/33.htm
Good luck,
Jay
On Mon, 25 Nov 2002 11:27:58 -0500 "Walt Philipson"
<wphilipson@nc.rr.com> writes:
> My voltmeter never gets above 13.5 volts (approx). My alternator was
> recently rebuilt. I tested the circuit per Dan's instructions. I get
> 13.5 at
> the battery, with everything off. I even put a charger on it and
> fully
> charged I only got 13.5. Shouldn't I get 14 to 14.6? The voltage at
> the
> small brown wire is also about 13.5, but my meter is pretty coarse,
> so I'm
> not sure I can detect .2 volt difference. Also, I think my sensor
> light is
> burned out. For whatever reason, it doesn't work when I short the
> brown/yellow wire to ground. Wouldn't this open the sense circuit?
>
> Am I missing something here?
>
> Walt
> 74 TR6
|