Al,
Go to your hardware store and get some 1/2" teflon tape. Give the threads on
the plug 2 or 3 wraps and install. Works great.
Be sure that you wrap in the proper direction. Hold the plug with the
threads away from you and wrap while turning the plug in a clockwise
direction. (If you wrap in the other direction, the tape will lift off as
the plug is threaded into the hole.
Peter
'68 TR250
on 9/19/02 10:36 AM, Paula J. Graffam at pjgraffam@juno.com wrote:
> Listers,
> Each morning I find a teaspoon deposit of oil on my garage floor coming
> from my oil pan plug. I replaced it with a new plug and it got worse!
> Is there an application I can use to dress up the threads and make a good
> seal?
>
> Al Graffam 74TR6 CT.
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
|