Re: clutch problem

[Mitchel Seff <ms6453@optonline.net>]

Rick,
Check the travel on the slave cylinder, if it's moving at least a 1/2" 
  and the SC is mounted correctly you may have a the dreaded fork pin 
failure. It seems to be a plague. Try moving the SC rod up to the top 
notch. If this helps it's probably in the fork travel & a tranyectomy 
will need to be performed. It's not difficult, just laborious. Check 
the Buckeye triumph web site for a complete explanation.
-- 
Mitch Seff
75 TR6
Oceanside, N.Y.