Resolved: Addco rear sway bar install

[Tom Lofgren <tom.lofgren@stanfordalumni.org>]

Hi,

Thanks to all who responded on my sway bar installation problem.  I ended up
also talking to the guys at Addco (http://www.addco.net).  It turns out they
have a diagram which wasn't in the kit.  The bottom line was that the cupped
washers in between the trailing arm and the sway bar should be omitted, which
allows everything to fit.  So, I ended up with:

1. bolt head
2. cup washer
3. rubber bushing
4. medium size flat washer
5. large size flat washer
6. trailing arm
7. large size flat washer
8. medium size flat washer
9. rubber bushing
10. rubber bushing
11. sway bar
12. rubber bushing
13. cup washer
14. nyloc nut

Now I just have to drill some holes in my frame...

Thanks again for the help,
Tom
'69 TR6 CC25230


____________________________________________________________________