Re: Pulley/balancer/fan extension bolt

[tr6taylor@webtv.net (Sally or Dick Taylor)]

Kyle---If you can get a torque of 100lb. on this bolt it probably won't
go anywhere. It might be necessary use a counter acting force to hold
the pulley extension when trying to tighten this bolt. A pipe wrench
will work, if you don't mind some teeth marks. If the engine is out of
the car, there are flywheel locks that will hold the crankshaft when
doing such chores. You can find these locks at good auto parts stores.

I also use the Blue Loctite on the pulley bolt threads.

Dick T.
'73