Re: U-joints

[jay_welch@juno.com]

I used to use the "bang 'em til they come out" approach.  I used an old
1/2" socket extension, a 2 pound sledge and a large socket or piece of
pipe to receive the bearing cups.  Recently, my neighbor bought a small
arbor press ($40 or so) and it makes the job much simpler.  It does need
to be firmly attached to a fixed work bench though. 

Jay Welch, Abington MA
1971 TR6 project
1973 TR6 driver - wanting to "Drive it Hard"
Member "Cape Cod British Car Club" @ 
http://clubs.hemmings.com/capecodbritish/