Todd,
Yes, I've done it. I used trans mounts cut from a late TR6 frame,
carefully welded into the early frame. A little trimming is then
required on the early left trans mount to allow the J-type O/D solenoid
to clear. If you have a late frame in good shape, use it all if
possible. It's a stronger piece.
Not a 'bolt-in' job, but do-able. Hope this helps!
Jim
----- Original Message -----
From: "Todd Bermudez" <fattr6@hotmail.com>
To: <6pack@autox.team.net>
Sent: Thursday, August 23, 2001 10:53 AM
Subject: Early 4 speed to J-type O/D conversion
> I've a TR250/w a 4 speed. I also have a later transmission/w a J-Type
o/d.
> Has anyone converted to the J-type tranny? Does anything have to be
done to
> frame or is it modifying the mounts?
>
> Thanks,
>
> Todd Bermudez
> 513-352-8813
>
> _________________________________________________________________
|