OK, you guys want to go nuts? This link has been around before:
http://www.TotalAdvance.com/projects.htm
When you build your supercharger, what you really want is an intercooler. You
should put the supercharger on the other side of the engine. Pull air through a
throttle body, into the supercharger, feeding the air into a pipe, through an
intercooler, then into the intake manifold.
A good rule of thumb is that you should be able to make 250 HP from a low
compression 2.5 liter engine and around 10 lbs of boost (the intercooler is the
key).
All you need is money. Oh yeah, along with money, you'll also need more money.
Ed McGuirk
76 TR6
86 Rx7
88 MR2 Supercharged
===============================================================
Date: Tue, 10 Apr 2001 17:11:07 -0700
From: Phil Buck <PhilB@kxr.com>
Subject: Re: Superchargers and Lucas PI
Since we're talking PI here is a site to ogle over. These folks have
Throttle body kits to fit our cars!!!!
This page shows the throttle body that replace DCOE webbers!
http://www.twminduction.com/ThrottleBody/ThrottleBody-FR.html
But the one I am most interested in is on page 5 of their catalog.
http://www.twminduction.com/Catalogs/Catalogs-FR.html
This kit replaces Zenith Stromberg carbs with throttle bodies!!!!!!!!!!
This is high on my wish list.
Philip
72 TR6
73 Stag
Santa Cruz CA
===================================================================
|